Quote:
Notes from Jean-Louis Naudin This device uses the "possible" emission of a curl-free-A potential which radiates from the Rodin coil both to its inside or center space and outside and beyond into space. The device is being under tests and I can't confirm this fact today. Also I give you this electronic diagram for your information and I take no responsiblity concerning the supposed characteristics (Faster Than Light (FTL) transmissions, E.T. communications
Obviously if you hold all the B-Field inside the coils of the torus, and then put something else in the center region outside the coils, you can get some additional potential and field energy there in the center of works. You can also get similar propagation outside the coil, with effects on distant objects.
Rodin is apparently going by elementary electricity concepts but augmented by excellent native intuition. What he really is doing is attempting to separate the A-potential (i.e., the magnetic vector potential A) from the B-Field, and utilize the curl-free A-potential as an independent field of nature in the central "crossover" region. It is know that it is possible, the well known Aharonov-Bohm effect depends upon precisely this separation...¯
In the Rodin's document about the coil design:
A winding pattern for a torus which creates Synchronized Electricity. By winding in this manner, you orient the electrons moving through the windings and thereby minimize random collision of electrons, as well as heat, friction and reluctance. The right and left doubling circuits (beginning and ending at position 1; and, beginning and ending at position 2) conduct the flow of electrons in opposite, parallel diagonal directions. The dotted lines (beginning and ending on numbers which are multiples of 3) represent the gap spaces, the equal potential major grooves, which separate the winding.
Today, according to my first series of test, I can say that this coil have some interesting spec:
Obviously the center crossover region is active. A long ferrite rod placed through the center of the Rodin style coil change the value of the inductance. So, the center region in Rodin style coil is quite active.
Notes from Jean-Louis Naudin This device uses the "possible" emission of a curl-free-A potential which radiates from the Rodin coil both to its inside or center space and outside and beyond into space. The device is being under tests and I can't confirm this fact today. Also I give you this electronic diagram for your information and I take no responsiblity concerning the supposed characteristics (Faster Than Light (FTL) transmissions, E.T. communications
Obviously if you hold all the B-Field inside the coils of the torus, and then put something else in the center region outside the coils, you can get some additional potential and field energy there in the center of works. You can also get similar propagation outside the coil, with effects on distant objects.
Rodin is apparently going by elementary electricity concepts but augmented by excellent native intuition. What he really is doing is attempting to separate the A-potential (i.e., the magnetic vector potential A) from the B-Field, and utilize the curl-free A-potential as an independent field of nature in the central "crossover" region. It is know that it is possible, the well known Aharonov-Bohm effect depends upon precisely this separation...¯
In the Rodin's document about the coil design:
A winding pattern for a torus which creates Synchronized Electricity. By winding in this manner, you orient the electrons moving through the windings and thereby minimize random collision of electrons, as well as heat, friction and reluctance. The right and left doubling circuits (beginning and ending at position 1; and, beginning and ending at position 2) conduct the flow of electrons in opposite, parallel diagonal directions. The dotted lines (beginning and ending on numbers which are multiples of 3) represent the gap spaces, the equal potential major grooves, which separate the winding.
Today, according to my first series of test, I can say that this coil have some interesting spec:
Obviously the center crossover region is active ,.. .A long ferrite rod placed through the center of the Rodin style coil change the value of the inductance.... So, the center region in Rodin style coil is quite active...¯
Notes from Jean-Louis Naudin This device uses the "possible" emission of a curl-free-A potential which radiates from the Rodin coil both to its inside or center space and outside and beyond into space. The device is being under tests and I can't confirm this fact today. Also I give you this electronic diagram for your information and I take no responsiblity concerning the supposed characteristics (Faster Than Light (FTL) transmissions, E.T. communications
Obviously if you hold all the B-Field inside the coils of the torus, and then put something else in the center region outside the coils, you can get some additional potential and field energy there in the center of works. You can also get similar propagation outside the coil, with effects on distant objects.
Rodin is apparently going by elementary electricity concepts but augmented by excellent native intuition. What he really is doing is attempting to separate the A-potential (i.e., the magnetic vector potential A) from the B-Field, and utilize the curl-free A-potential as an independent field of nature in the central "crossover" region. It is know that it is possible, the well known Aharonov-Bohm effect depends upon precisely this separation...¯
In the Rodin's document about the coil design:
A winding pattern for a torus which creates Synchronized Electricity. By winding in this manner, you orient the electrons moving through the windings and thereby minimize random collision of electrons, as well as heat, friction and reluctance. The right and left doubling circuits (beginning and ending at position 1; and, beginning and ending at position 2) conduct the flow of electrons in opposite, parallel diagonal directions. The dotted lines (beginning and ending on numbers which are multiples of 3) represent the gap spaces, the equal potential major grooves, which separate the winding.
Today, according to my first series of test, I can say that this coil have some interesting spec:
Obviously the center crossover region is active ,.. .A long ferrite rod placed through the center of the Rodin style coil change the value of the inductance.... So, the center region in Rodin style coil is quite active.
http://www.angelfire.com/ak5/energy21/rodin.htm
http://jnaudin.free.fr/html/rcoil.htm