The Ultimate Crystal Power Source -- Stellar Ferromagnetic Crystals, Piezoelectricity, and the Etheric Force
The Electric Sun vs. the “Nuclear Fusion/Gravitational Collapse” Solar Model
THE COSMIC POWER GRID
The standard model of the Sun traces back to the work of Sir Arthur Eddington in the 1920s, which was based on maintaining an equilibrium between the compression of a gaseous sphere under gravity, and an expansive force due to an interior heat source. In the following decade, studies of nuclear physics established the mechanism whereby hydrogen nuclei (protons), given sufficient energy, can fuse together to form helium atoms in a process that yields significantly more energy per reaction than even that obtained from uranium fission. The Sun was known to consist predominantly of hydrogen, and so the story recounted in all the textbooks today took shape, of the Sun being powered by thermonuclear reactions deep in the core, ignited by heat generated through gravitational compression.
In the electric sun (ES) model the important variable is current density (Amps/sq m) at the star's photospheric surface. If a star's current density increases, the arc discharges on its surface (photospheric granules) get hotter, change color (away from red, toward blue-white), and get brighter. The absolute luminosity of a star, therefore, depends on two main variables: current density at its effective surface, and its size (the star's diameter).
However, in the ES model, there are no minimum temperatures or mass requirements because the star is inherently electrical to start with. In the ES model (if a brown/red dwarf is operating near the upper boundary of the dark current mode), a slight increase in the level of total current impinging on that star will move it into the normal glow mode. This transition will be accompanied by a rapid change in the voltage rise across the plasma of the star's atmosphere. Maxwell's equations tell us that such a change in voltage can produce a strong dynamic E-field and a strong dynamic magnetic field. If they are strong enough, dynamic EM fields can produce X-rays. Another similar phenomenon can occur if a star makes the transition from normal glow to arc mode.
Wal Thornhill once said: "….. internal electrostatic forces prevent stars from collapsing gravitationally and occasionally cause them to "give birth" by electrical fissioning to form companion stars and gas giant planets. Sudden brightening, or a nova outburst marks such an event. That elucidates why stars commonly have partners and why most of the giant planets so far detected closely orbit their parent star."
Mainstream astronomy attempts to describe how stars 'age' (run out of nuclear fuel) and slowly migrate, taking hundreds of thousands of years to do so, tracing paths from one location on the HR diagram to another (the star going from one spectral class to another). The ES model does not make that assumption.
Dogon cosmology mentions Sirius and “hydrogen astrophysics”. What is “hydrogen astrophysics”?
http://www.thunderbolts.info/forum/phpB ... 780#p20743
Dogon Cosmology, Sirius, and Hydrogen Astrophysics
http://tribes.tribe.net/kmt/thread/1b86 ... 30509bb63d
Sirius B’s interior was transformed from gaseous hydrogen plasma to a solid ionized hydrogen crystal. Sirius B is a star that has many of the qualities of a Black Hole. Their primary energy is not thermonuclear, but piezoelectric (ionic energy due to gravitational pressure). Dwarfs have electromagnetic fields that are stronger and a billion times larger than regular stars. They rotate incredibly fast, and circulate their particles for several thousand light-years.
Do stars use piezoelectricity to generate “nuclear fusion? Is “nuclear fusion” really an expression of the “Etheric Force”? Can “nuclear fusion” be generated by crystalline materials through piezoelectricity?
What is a Typical Definition of Nuclear Fusion?
http://www.fzk.de/fzk/idcplg?IdcService ... 95&lang=en
In the inner of the sun fusion reactions occur at some 15 million degrees. A number of fusion reactions among light atomic nuclei are possible. In the first generation of future fusion power reactors the deuterium - tritium reaction will be applied which offers a comparable high performance: The nucleus of the “heavy hydrogen”, deuterium (one proton and one neutron), fuses with the nucleus of the “heavy-heavy hydrogen”, tritium (one proton and two neutrons), forming a helium-4 nucleus, the so-called alpha-particle (two protons and two neutrons) while emitting one high energetic neutron. This process releases four times more energy as the fission of a uranium nucleus. Some 80 % of this energy is bound to the neutron which, being a neutral particle, unhindered can leave the plasma.
What is cold fusion?
Room Temperature Cold Fusion Scientifically Proven!
http://www.greenoptimistic.com/2009/03/ ... ld-fusion/
Until now, it has been believed that cold fusion can only be achieved in very complex nuclear reactors able to work at temperatures of tens of millions of degrees Fahrenheit. However, the scientists that originally described the phenomena, said it could be obtained at room temperatures - a simple device called “electrolytic cell”, yet no one could repeat their claimed experiment, that produced electricity from an abundant fuel, deuterium (“heavy water”), and that could be extracted from seawater.
The Etheric Force and Cold Fusion: When Discovery and Invention Don't Mix
http://bart.tcc.virginia.edu/book/chap3 ... 3sec1.html
Basically, their 'cold fusion tokamak' was an electrolysis cell with a palladium rod down the center, used to separate deuterium from ordinary water. The two researchers knew that palladium has a natural affinity for hydrogen and that the deuterium would therefore migrate into the palladium. They theorized that inside the crystal lattice of the palladium, the hydrogen would be under very high pressure-perhaps enough pressure to produce fusion. Their initial experiments suggested that this palladium cell produced an excess of heat--in one case, enough to cause the cell to explode, fortunately when no one was nearby.
Is “cold fusion” really the Etheric Force at work – the dissociation of hydrogen through vibration?
The Ultimate Constitution of Matter and the Action of the Force Regulating its Phenomena
First: Matter is capable of infinite subdivision.
Second: In the aggregation of matter, force or energy is stored up or conserved.
Third: In the dissociation of matter, force is liberated.
Fourth: All matter is in a state of perpetual activity, whether the substance under consideration be inanimate or animated, visible or invisible.
Fifth: There is no dividing of matter and force into two distinct terms, as they both are one. Force is liberated matter. Matter is force in bondage.
Matter is made of molecules, atoms and particles. Nuclear physics knows how to disintegrate atoms to release the inner particles of the nucleus. Once released after big impacts between atoms of atoms and particles, each particle has a definite speed and kinetic energy which has a "signature".
As we have seen, a chemical atom may be dissociated into less complicated bodies; these again, into still less complicated; these again, into yet still less complicated. After the third dissociation but one more is possible: the fourth dissociation gives the ultimate physical atom [particle] on the atomic subplane [level of the first particle], the Anu. This may vanish from the plane, but it can undergo no further dissociation on it. "
Vibrations that Split Molecules
http://lltfdaniel.blogspot.com/2007/09/ ... cules.html
Seawater - or even dirty rainwater - could be transmuted into fuel through a new technique serendipitously discovered by a researcher in medical electronics.
Dr. Andrija Puharich has found a way to split water molecules by tuning in on the vibrations of their atoms and breaking the molecules into hydrogen, which could become fuel, and oxygen.
Alternating-current impulses augment naturally occurring vibrations in the H2O molecules. By boosting the vibrations out of control, Puharich makes the molecules fly apart into the component atoms.
He likens the water-splitting effect to the way soldiers marching in step across a bridge risk damaging the structure by making it vibrate at a critical, stress-producing rate.
Electrolysis by simple direct current would create hydrogen and oxygen with a net energy efficiency of only 54 percent, according to Puharich. But he says his alternating-current system reaches better than 90 per cent efficiency.
Originally, he was investigating the disruptive effect of electrical resonances on blood clots and noticed a peculiar thing: in dilute blood, a specific frequency made bubbles appear in the liquid.
Lab analysis showed that the bubbles were composed of oxygen and hydrogen.
A barrel-shaped cavity contains the water in Puharich's recently refined system. He introduces alternating current at a key frequency of 600 cycles per second.
The cavity resonates with the impulses in somewhat the same way the body of a violin resonates with the sound of one string, adding high and lower harmonics to the principal tone.
The additional harmonics, Puharich says, cause the proton in the hydrogen atom to rotate further forcing the hydrogen to split from the oxygen.
Puharich suggests that the splitting energy could be provided by solar or wind generators. The hydrogen could then be stored and used conveniently in fuel cells or hydrogen-powered cars.
Is cold fusion produced by using the Latent (etheric/electrostatic) Force to dissociate hydrogen to lower energy levels?
Black Light power
BlackLight Power, Inc. has created a commercially competitive, non-polluting new primary source of energy. From the solved physical structure of electrons in atoms, a process to release the latent energy of the hydrogen atom was invented. In BlackLight's patented process, atomic hydrogen is reacted with a catalyst, and energy is released as the electrons of atomic hydrogen are induced by the catalyst to undergo transitions to lower energy levels to form lower-energy hydrogen atoms called hydrinos. Since hydrinos have energy levels much lower than uncatalyzed hydrogen atoms, the energy release is intermediate between conventional chemical and nuclear energies.
Piezoelectricity and “nuclear fusion”
http://hyperphysics.phy-astr.gsu.edu/Hb ... piezo.html
Crystals which acquire a charge when compressed, twisted or distorted are said to be piezoelectric. This provides a convenient transducer effect between electrical and mechanical oscillations. There is a magnetic analog where ferromagnetic materials respond mechanically to magnetic fields. This effect, called magnetostriction, is responsible for the familiar hum of transformers and other AC devices containing iron cores.
http://aml.seas.ucla.edu/research/areas ... erials.htm
Magnetostriction is the changing of a material's physical dimensions in response to changing its magnetization. In other words, a magnetostrictive material will change shape when it is subjected to a magnetic field. Most ferromagnetic materials exhibit some measurable magnetostriction.
Method and Apparatus for Generating Nuclear Fusion Using Crystalline Materials
http://groups.google.com/group/sci.phys ... 65103e88a8
Gently heating a pyroelectric crystal in a deuterated atmosphere can generate fusion under desktop conditions. The electrostatic field of the crystal is used to generate and accelerate a deuteron beam which, upon striking a deuterated target, produces a neutron flux over 400 times the background level. The presence of neutrons within the target is confirmed by pulse shape analysis and proton recoil spectroscopy. Several elements of the system may be modified, including the configuration of the crystal or crystals, the composition of the surrounding environment and the target, the use of multiple probe tips, and the composition of the probe tip.
Observation of Nuclear Fusion Driven by a Pyroelectric Crystal
Attempts to create controlled nuclear fusion - the process that powers stars - have been a source of continuing controversy. Scientists have struggled for decades to effectively harness nuclear fusion in hot plasma for energy generation - potentially a cleaner alternative to the current nuclear-fission reactors - but have so far been unsuccessful at turning this into an economically viable process.
Meanwhile, claims of cheap 'bench-top' fusion by electrolysis of heavy water ('cold fusion') and by sonic bubble-formation in water (sonoluminescence) have been greeted with skepticism, and have not been successfully reproduced.
The team initiates fusion of deuterium - heavy hydrogen, the fuel used in conventional plasma fusion research - using the strong electric field generated in a pyroelectric crystal. Such materials produce electric fields when heated, and the researchers concentrated this field at the tip of a tungsten needle connected to the crystal. In an atmosphere of deuterium gas, this generates positively charged deuteron ions and accelerates them to high energy in a beam.
http://books.google.com/books?id=vX0jf7 ... _0#PPA3,M1
Ferroic materials are important, not only because of the improved understanding of condensed matter, but also because of their present and potential device applications. This book presents a unified description of ferroic materials at an introductory level, with the unifying factor being the occurrence of non-disruptive phase transitions in crystals that alter point-group symmetry. The book also aims to further systematize the subject of ferroic materials, employing some formal, carefully worded, definitions and classification schemes. The basic physical principles leading to the wide-ranging applications of ferroic materials are also explained, while placing extra emphasis on the utilitarian role of symmetry in materials science.
Magnetism - Ferromagnetic materials
http://www.britannica.com/EBchecked/top ... -materials
Iron is a typical ferromagnet. Not all bars of iron are magnets; the existence of magnetism is determined by the nature of the domains within the bar. A domain is a region of a crystal in which all the ions are ferromagnetically aligned in the same direction. A bar may be composed of many domains, each having a different magnetic orientation. Such a bar would not appear to be magnetic. Each piece of the bar is magnetic, but the domains have moments that point in different directions, so the bar has no net moment. If the bar of iron is placed in a strong magnetic field, however, the bar becomes magnetic. The field causes the bar to become a single domain with all moments aligned along the external field.
The Sun is a ferromagnetic crystal that uses piezoelectricity to produce “nuclear fusion”?
The Surface of the Sun
The sun's photosphere is often mistakenly referred to as the surface of the sun. In reality however, the sun's photosphere is only a "liquid-like" plasma layer made of neon that covers the actual surface of the sun. That visible layer we see with our eyes is composed of penumbral filaments that are several hundred kilometers deep. This visible neon plasma layer that we call the photosphere, and a thicker, denser atmospheric layer composed of silicon plasma, entirely covers the actual rocky, calcium ferrite surface layer of the sun.
The composition and mechanical inner workings of the sun beneath the visible photosphere have remained an enigma for thousands of years. There are a whole host of unexplained phenomena related to the sun's activities that still baffle gas model theorists to this day because they fail to recognize the existence of an iron alloy transitional layer that rests beneath the visible photosphere. These 21st century satellites and technologies now enable us to peer behind the outer plasma layers of the chromosphere and photosphere and allow us to study the rocky, calcium ferrite transitional layer with incredible precision.
While the gas model has enjoyed popular support over the past 50 years that has not always been the case. In fact astronomers of 100 years ago believed in a predominantly iron sun, most notably Dr. Kristian Birkeland. Dr. Birkeland studied the Northern Lights and became interested in the electrical interaction between the sun and the earth. His early lab research with an electrified iron sphere suspended in a vacuum ("terella") led to images that are remarkably similar to modern satellite x-ray images of the sun.
The running difference imaging technique used by both NASA and Lockheed Martin have revealed to us for the first time that the sun is not simply a ball of hydrogen gas; it has a hard and rigid ferrite surface below the visible photosphere that can be seen in all of the images on this page!
Just as Birkeland surmised, it turns out that the sun has a highly defined surface that rotates (uniformly) every 27.3 days. Dr. Birkeland was at least 100 years ahead of his time.